Go See #BlackPanther Now!

Black_Panther_1024x1024.jpg

Hey, beautiful people! I just wanted to give my thoughts on the movie and I promise I won’t give away too many details because you must go see it for yourself!

I wasn’t expecting Black Panther to give me feelings that were any different from any of the Avengers movies, Iron Man movies, Captain America movies etc., etc. but in fact, it did.

As a black woman, I never had plans of going to see this movie because it’s the first black super hero Marvel has given us (as awesome as that is!). I just wanted to go and enjoy another bad ass Marvel super hero movie. As it turned out, as I sat there in the theater and watched the movie, my inner being felt so much love from seeing a MARVEL movie featuring a BLACK super hero, with nearly a full BLACK cast of people playing these amazing characters!…and to sit there and enjoy this movie with a bunch of strangers of all races and nationalities…such a beautiful feeling!

I highly recommend this movie to anyone reading this right now. You have a black king and super hero, you have strong women warriors who are total bad asses right along side him, you have villains who make you laugh (one especially!) and most importantly, make sure you stay a little after the credits start rolling because the Black Panther gives an important, loving message to the human race <3.

Go and see it and come tell me what you think! Thanks for reading!…

gfvbwjcrc1z20ntvontr

black_panther_11

black-panther-poster-angela-bassett

DONMMisWsAAhEiU

ladyclawpanther

DOMyb22UMAA3RcI

-Black-Panther-Character-Poster-black-panther-40847166-823-1200

DONvtoIUQAAut3p

michael-b-jordan-black-panther-poster

95

black-panther-posters-09_marvel

Advertisements

Let’s Turn Dessert Toppings Into Art!

I’m sure we’ve all seen those cute, decorative glass jars and bottles that can be found in kitchens and restaurants that look like this….

Make-Decorative-Bottles-for-the-Kitchen-Step-7.jpg

Well, it’s time to switch things up!!!

giphy

Here’s what you’ll need:

*Glass jar or bottle of any size.

*Enough sweet goodness to fill it up with like sprinkles, brown sugar, chocolate chips, crushed oreos, candy, etc., etc., etc.

*Optional-get some puffy paint and fake sprinkles to decorate your jar or bottle after it’s been glued shut. Otherwise, grab whatever you want to decorate the lid with and make it less boring.

*Oh, yeah and glue 😉

Let’s get started!

giphy.gif

By the way, this step by step process will not contain pictures for every step because it’ll just be me typing, “Step 1, pour in your first topping….Step 2, pour in your second topping.” LOL. I won’t do that to you today so let’s just see the finished product and I’ll give you some tips…

IMG_20180201_163835.jpg

I have a few of these three ounce jars in my craft stash that I want to put to good use and this is what I plan to do with every one. Sprinkles and brown sugar are all I have around at the moment but just imagine what you can do with the toppings and candy you choose in the jar or bottle you choose!

You can even gift one to a friend or family member that’s not glued shut and filled with their favorite candy all stacked in a decorative way just before they eat it all ;-).

The biggest tip I have is just make sure each layer is exactly how you want it before moving onto the next. That way you don’t have to worry about pouring that shit out and starting over again. Haha.

Decorate the lid how ever you want but I love the frosting and sprinkles look so that’s where the puffy paints come into play. Make it look like frosting dripping down over the lid. Get your FAKE sprinkles from Amazon or Ebay or Etsy and sprinkle them on top and let it dry.

You can obviously use the fake sprinkles inside the jar as well but that’s no fun, is it? go for the real deal. Real ones will bleed onto the paint, by the way…trust me, I’ve tried it. So fake sprinkles outside and real sprinkles inside, por favor ;-).

giphy.gif

So that concludes this quick tutorial of something super fun you can do with your friends and family. Or just do it alone so that everyone around you thinks you’re a badass who is amazingly talented ;-).

You know, maybe I’ll make a bunch to sell and market them as a weight loss tool with the following instructions: “When you’re feeling like you want to reach for that extra cookie or cupcake you don’t need, just stare hard at this jar of sweets while drinking a glass of water. You’re welcome.” Hahaha.

My goofy-ness aside, thank you all for stopping by and I hope you enjoyed this one. I know I can’t wait to make more! Bye!….

giphy.gif

 

A.S.M.R.-Don’t Knock It Til You Try It, Honey!

giphy

Here’s what our good friend, Wikipedia, says about A.S.M.R….

“Autonomous sensory meridian response (ASMR) is a term used for an experience characterised by a static-like or tingling sensation on the skin that typically begins on the scalp and moves down the back of the neck and upper spine. ASMR signifies the subjective experience of “low-grade euphoria” characterised by “a combination of positive feelings and a distinct static-like tingling sensation on the skin”. It is most commonly triggered by specific acoustic or visual stimuli, and less commonly by intentional attention control.”

In a nutshell, ASMR makes you feel like you’re this guy…

giphy1.gif

It’s been about a year since I first came across ASMR on YouTube accidentally. Honestly, I wonder just how far deep in the YouTube universe I traveled in order to accidentally come upon it.  You know how it goes: one minute you’re looking at cat videos and then an hour goes by and you’ve come to a video titled, “Flying Whales: Do They Really Exist?” LOL.

giphy.gif

The first ASMRtist I came across (if I’m remembering correctly) was ASMR Darling. Check out her YouTube Channel here: Click Here For ASMR Darling.

After watching a few of her videos and learning a little more about how ASMR works, I was reminded of the very first time I experienced ASMR in my life that I could remember. It was a few years back in Los Angeles. I was in a Japanese nail art salon getting my nails done. The salon was silent. I was relaxed with two woman working on my nails at once. As they worked on me, they were whispering to each other in Japanese about what I can assume was life, work and maybe even me (no, they were really kind I would hope not). Haha. The sound of their whispers was so relaxing to my ears! I felt like I was being hypnotized to sleep just from the sounds of their whispers. Very strange but every cool!

giphy

There are people who are immediately turned off by ASMR without even properly educating themselves on the subject, “Ewww, it’s too fetish-like for me…” What?? No, it’s actually you making it fetish-like. They’re not pulling out whips and tying viewers to imaginary bed posts before spanking them for crying out loud. LOL (although if you travel deep enough into YouTube, who knows…). I personally, like to darken my laptop screen before bed, pop in those ear phones and just listen. It’s all about the sounds for me.  Although watching an ASMRtist brush their hands softly in front of the camera in an up and down motion can definitely help lull me to sleep as well.

Definitely give this a good go and explore different ASMR videos and discover what your triggers are. Do you like the sound of whispering like I do? Did you feel like falling asleep in a silent high school class room back in the day when there was nothing but the sounds of pencils on paper and the turning of pages? Do certain visuals help relax you? These are examples of triggers. Type them into the YouTube search and go from there. You may just find yourself addicted some day and you won’t be able to get enough of your ASMR videos before bed (or whenever) or you may decide it’s not for you at all. Promise me you’ll at least try it out ;-).

giphy.gif

There are great benefits to ASMR too.  It can help with insomnia, lower stress levels, help people with anxiety and I even read something about the digestive system and weight loss (the last one doesn’t work for me *ahem*)! These are only a few examples of what ASMR can do for you but most importantly, it makes you feel good and when you feel good you’ll start to do other things to take better care of yourself.

Okay, now it’s time to list my top five favorite ASMRtists:

Maria (Gentle Whispering)

Emma (WhispersRed)

Gibi (Gibi ASMR)

Dmitri (Massage ASMR)

Fred (FredsVoice ASMR)

There are many, many, many more great ASMRtists out there but these are the four that I personally check in on the most to see their latest videos <3.

I’ve come to appreciate ASMR so much that I was inspired to start my own embarrassing YouTube channel called, “Just ASMR Audio” a while ago. I wanted it to be just focused on just the sounds because that’s what I like and let’s be real, I don’t want to be on camera. LOL.  I don’t know if I’ll create more videos in the future but feel free to check out the first four videos I put on my channel here if you’d like: Just ASMR Audio  Maybe they’ll be of use to you or maybe you just want to have a laugh at an ASMR newbie (please let it be the second reason. :-P).

That is all for today, folks! I just wanted to give ASMR a shout out today and I hope you enjoyed it. Until next time…

giphy.gif

 

 

 

Let’s Make Some Deer Antlers/Ears!

 

109d7f0332b4bc5093e82b038af8d72c

Hey, beautiful people! The above picture is is an example of what we’re making today! Yay!!!!  The end result will be a different pair of antlers/ears because the ones above were sold years back (just so you know).

Here’s what you’ll need:

  • headband of your choice.
  • scissors
  • felt or anything you have to make ears out of. Optional if you only want antlers.
  • plenty of hot glue sticks and of course the hot glue gun.
  •  ribbon, tulle or even strips of frayed, pretty fabric to wrap around your headband to make it look less boring.
  • anything you’d like to decorate with, flowers, gems, buttons, whatevs.
  • pipe cleaner for the base of our antlers.
  • acrylic paint, water cup, paper towels, paint brushes.

Let’s do this!

giphy

Step One: Google, “Deer Antlers” to that you have a good example of how to shape yours out of the pipe cleaner. Found one!….

466280485_XS

Step Two: Grab three or four pipe cleaner and roll them all together into one. Do this twice, like so….

IMG_20180120_123006

Step Three: Twist them as tightly as you can to the headband and you will end up with this (it’s okay if they slide around after they’re on the headband, glue will come later)…

IMG_20180120_123530

Step Four: Perfect! Now use the picture you found on Google as your inspiration, grab some more pipe cleaner and it’s time to start adding onto your antlers. You add on by using technique we used previously. Twist a few pipe cleaners together first and then twist them onto the ones you’ve already attached to the headband. How ever you do it, it doesn’t matter, as long as they end up attached and shaped how you like. Use your scissors to cut certain bits off if needed. I’ll do mine and show you…

IMG_20180120_130854.jpg

I’m happy with the shape of mine. If you are working with a metal headband or probably any headband, you’ll notice those antlers easily slide from left to right. Instead of using glue, I decided  to cut strips of tulle (use whatever you have) to secure them more tightly in place. You’ll still be able to slide them but at least they won’t move too much for the next step…IMG_20180120_130859

Step Five: Plug in that hot glue gun. I can sense  that you’re doubting me right about now but just you wait. This is about to be an upgrade from the antlers in the first picture ;-). Make sure your antlers are exactly how you want them as far as shape and placement on the headband. Check and Check? Okay, let’s go…

Step Six: We are covering that not so cute pipe cleaner with layers of hot glue! Please be careful! Be mindful of where your fingers are because that stuff drips! It’ll sneak up on you. If you happen to have a low temp hot glue gun or a hot glue gun with a low temp setting, that actually works better for this part because the glue won’t come out like lava and will stick to the pipe cleaner easier since it’s cooler. If you don’t have a low temp hot glue gun, that’s fine too.

Put on some music or a movie. This process is a bit tedious. Just when you think you’ve covered all the pipe cleaner with hot glue? You haven’t. LOL.

Do one layer of hot glue over the pipe cleaner, let it cool, do another, let it cool and so on and so forth until you are satisfied with how they look. If there is a place you put the hot glue that didn’t turn out so great, just melt it with the tip of your hot glue gun and start over…or cut it off and start over. Here’s how mine turned out…

Step Seven: It’s time to to paint (pull off the millions of hot glue strings first)!  Grab some acrylic paint in whatever color/s you want and paint away. Paint one side, lay it down and let it dry, then paint the other side, lay it down and let it dry. Or, you can do what I did and be anxious to get it done and paint the entire thing at once. The catch is you’ll have to let it air dry in your hands instead (If I can do it, anyone can).

Other options:

*Cover the antlers in Mod Podge  and sprinkle glitter all over and let it dry and top with more Mod Podge to finish. Or….

*Forget about the hot glue all together and wrap the pipe cleaner in brown or tan yarn or even tulle (like in the very first picture) from top to bottom, adding glue along the way until finished.

Let’s see how mine turns out….

IMG_20180120_145654

They aren’t dry yet but as the kids say these days, “Can you even?!?!?” I went with a purple and black ombre effect. In the future, as your antlers go through the circle of life, they will probably get paint scratched off of them here and there….just fix it with more paint :-). Now, I’m going to let mine dry….

giphy.gif

Step Eight: Now that your antlers are nice and dry, it’s time to cover that boring headband with whatever you want. I’ll be using brown glitter tulle. Put a dab of hot glue (or any glue) on the bottom of the headband and start wrapping, placing a dot of glue every few inches along the way. When you arrive at the antlers, take extra care and wrap around the base of the antlers so you know they aren’t going anywhere! Here’s what the start of the wrapping looks like (sorry, it’s blurry)…

 

IMG_20180120_154411

Completed…

Step Nine: This is where I would begin cutting my ears out of felt but I’ve decided I don’t want them this time. I’ll still give you a quick run down of how it’s done. Choose an outer ear color and an inner ear color of felt (I usually use brown and tan or brown and pink). The outer ear color will be cut into a larger size than the inner ear so that both colors properly show when you glue them together (like in the first picture). Place two felt scares on top of each other and cut out your ear shape. Do this for each size/color. If you can’t free cut very well, draw out your own stencils on tag board first like this (then you glue the inner ear on top of the outer and attach them to the headband with hot glue)….

IMG_20180120_164919

Step Ten: Remembering that MY end result won’t have ears, let’s continue. Turn on your hot glue gun again. This is where a high temp gun would be good! On projects like these, flowers can end up falling off  (eventually) so a high temp hot glue gun definitely is good for making sure that your faux flowers stay on for a long time.

It’s time to create a nice felt shelf for your flowers to sit on when you glue them onto the headband. Get a piece of felt, cut out a rectangle that will sit on the under side of the headband, right in between the antlers like this….

Step Eleven: Get your faux flowers ready and decide how you want them to look before you start gluing them onto the headband. PLEASE be careful. If you don’t have near fingers of steel like I do from years of burning my finger tips then I suggest you figure out a creative way to not get burned because you NEED to be able to press the flowers on pretty firmly after the hot glue is applied.  Maybe put on two pairs of rubber gloves or something. Haha.

Anyway, what I like to do is decide which flower will go in the middle and then build around it from there. Make sure to glue the flowers far enough forward on the felt so that they cover it. Squeeze a good amount (but not too much) hot glue on the larger flowers in particular and always remember to press firmly and hold every single flower for 8 to 10 seconds each. You can start to build your flower pyramid upwards, gluing flowers on top of flowers until you are happy with the final look….

 

IMG_20180120_163918

Although these look better in person than they do in the photo (LOL), I would need to critique my own work. Even though the lumpy texture gives the antlers a unique look that I appreciate, I would definitely go lighter next time and make sure the ends are a little more pointed than rounded.

I went ahead and started some new ones and I think I’m getting there now ;-)….

IMG_20180120_203814.jpg

Step Twelve: Turn your antlers around and take a look at the back. Cut off anything you think needs to be cut off and make it as pretty as the front by adding even more flowers or leaves or both…

IMG_20180120_164004 (1)

All finished! I hope I inspired you to try something new and if you make a mistake, don’t let that stop you from enjoying yourself while creating art. Send me pictures of yours if you make them! Byeeeeee!

giphy


Click Image To Buy The Headbands I Use!

How To Create A MONSTER!!!

Yep, I got this attention grabbing blog title thing down *brushes off shoulders* ;-).

If you’re reading this on the day or night I that have posted this blog, look over to the right to see my Instagram feed and you’ll notice my mini paintings I’ve been doing lately. Within them……IS A MONSTER!!!

giphy.gif

My drawing skills are limited. If I tried drawing a portrait of someone, for example, it would probably end up looking something like Napoleon Dynamite’s drawing of Trisha. LOL.

8456172_orig

So, if you’re where I’m at with your drawing skills, I’m here to show how to do a SUPER EASY painting of a monster that there’s no way you can mess up!

Here’s what you’ll need:

  • A paint brush or paint brushes if you will be using more than one size.
  • A cup with water to clean the brushes as needed.
  • A paper towel or two for dabbing the water on.
  •  Glue of your choice.
  • Plastic googly eyes (because we, who cannot draw well ain’t got time to paint our own eyeballs. Plus, it looks cool).
  • Water color paint or any paint you want to use.
  • Your canvas of choice (I like to use a 4 inch by 4 inch canvas, purchased in a pack of 14 on Amazon. A mini canvas keeps your limited artistic skills condensed to one little scare of space and you end up looking like an amazing artist. Don’t worry, I got your back).

Okay, let the monster fun begin!…

giphy.gif

Step One: Cover your space as needed to keep paint from getting all over and grab that canvas.

Step Two: Grab your googly eyes (get them from Michael’s or any other craft store in your area) and glue on three or how ever many eyes you want your monster to have. You obviously can glue your eyes on after you paint your monster and let it dry. I just find it more fun to glue them on first because you are then forced to use your imagination and work around them to create a really cool looking monster…..or at least in my head that makes sense. LOL.

IMG_20180107_190454.jpg

Step Three: Let the painting begin! Start with a small brush to get some paint around those googly eyes, nice and neat and from there, you can go nuts. Decide what shape you want him or her to be. Switch up the colors every few seconds for a cool rainbow monster. Does he or she have spikes or horns? Does he or she have a tail? How many arms? None of it has to be perfect. Why? Because what monster is (that includes you, ya monster)?

IMG_20180107_191022.jpg

To get that drippy effect of the monster I posted on Instagram, hold your canvas vertical. Get that brush wet and painty (that’s right, I made up a word), place it on the canvas where you want and let the paint juice (made that up too) roll down, baby ;-). I’m going to stop typing and finish my latest monster painting and see how it turns out and post it for you all….

IMG_20180107_193243.jpg

Ta daaaaaaa! All finished. I even added a little bow to this one! I kinda had to since I glued the girly googly eyes on ;-).

I hope you all enjoyed this! You can always figure out what other fun little things you can glue to a canvas a paint around. For example, glue a toy dinosaur onto a canvas and paint where the dinosaur lives all around it. Trees, food coming from his or her mouth, a volcano in the background? Anything goes! Can’t paint a flower to save your life? Then glue a few fake ones on the canvas and only paint the stems and leaves! I know, I know…your mind is blown right now ;-).

Glue is your friend….as well as anything you want to glue to a canvas. So, get to it!

Here’s a close up of the first one I ever did…

IMG_20171230_141607_575.jpg

…and when I glued a few plastic skulls…

IMG_20171230_141342_283

Until next time, my beautiful friends….

 

 

Ugly Sweater Christmas Party On The Way?

…or just a Christmas party? or just Christmas? Worry not! I’m going to teach you how to make the perfect headband for the occasion and you’ll then take your newfound knowledge and make headbands for ALL of the holidays (I know you better than you do after all)!

giphy

Here’s what’s you’ll need:

  1. A headband of your choice (I buy metal headbands in bulk off of amazon).
  2. Pipe cleaner (you know, the colorful, fuzzy covered wire thingies) in whatever colors you want.
  3.  Tulle in whatever colors you want.
  4.  You can even use ribbon instead of tulle or both!
  5.  Your favorite strong glue.
  6. Felt to make your Christmas designs with.
  7. A marker to draw those designs if you need it.
  8. paper or tag board.
  9. Any extra embellishments to decorate your headband with.
  10. A few peppermint candies (real or fake, doesn’t matter).
  11. Don’t forget those scissors.

Let’s do this!

giphy (1).gif

Here’s what my headband looks like to start with:

IMG_20171130_235544

Step 1: Put a dab of glue on the bottom tip of the headband, place your tulle or ribbon on to the glue and begin the process of wrapping your entire headband. Make sure no metal (or plastic) is showing in between each wrap and place a dab of glue every few inches along the way to make sure that tulle or ribbon isn’t going any where. When you reach the other end of your headband, make sure to glue the end as well. Cut off any extra tulle or ribbon. If for some reason you get to the end of your tulle or ribbon before your’re done wrapping your headband, glue that piece down where it’s at and glue a new piece on top and continue wrapping from there. Now you’re done with the first step!

 

Step 2: Grab six pipe cleaners of your choice. Twist three of them together to form one strong one and then do the same with the other three.

IMG_20171201_005016

Step 3: Take each one and twist them tightly on the top of your headband (“Ahhh, I see where we’re going with this!,” is what you’re thinking at this point.) You can even wrap the pipe cleaner in tulle or ribbon but you may fine you don’t want or need to because we’ll be topping off our creation with a cute bow that covers them anyway!

 

Step 4: Now it’s time to create and glue on the fun stuff. Design whatever you want to out of felt. Draw out your designs on paper or tag board if you wish and trace them onto the felt.  I’m going to do a Christmas tree on one side and a snow man on the other. You can even cheat and go to the store and by some cute, light weight ornaments and glue those suckers on instead if you wish. If you want your design to be shown from the front and the back, make sure to cut out two identical pieces of each design. A good tip for making the designs look symmetrical? You already learned it when you were a kid when you’d cut out hearts from construction paper: fold that piece of paper or tag board in half and draw only half of the design. Of course this depends on what the design is. If you’re doing a candy cane, draw out your candy cane on your paper or tag board, cut it out and trace it twice. Here’s a picture of what I’m starting with:

IMG_20171201_011449.jpg

Step 5: If you’re afraid you may mess up, decorate and put your designs together before you glue them onto the pipe cleaner. If you’re like me and don’t give a shit and want to take your chances, glue on, my friend! Make sure you glue each design on at matching heights. I had to yank off my Christmas tree and glue it higher to match the snow man. Get it as close as you can. Here’s what it’s going to look like:

IMG_20171201_012744

Step 6: Now flip it over and this is what you’ll see:

IMG_20171201_012757.jpg

Step 7: Glue on your back pieces, lining them up with the front pieces the best that you can. This is what you’ll see (both sides are covering the pipe cleaner):

IMG_20171201_014346

Step 8: You can decorate each design, front to back, if you choose to. For now, I’ll just do one side for the sake of getting this tutorial to you faster. I made the snow man’s nose out of felt, added a white felt heart to his hat just and used puffy paint for his eyes and mouth and a few lines on his nose. For the tree, I added a yellow star button I had, some gems and more puffy paint was used to finished it off.  You can use whatever you have at home. There is no wrong way to do it…unless you aren’t enjoying what you’re doing of course ;-). Here’s what mine looks like:

IMG_20171201_020616.jpg

Step 9: Now, for the grand finale. We’re going to make a bow to cover up even more of that pipe cleaner! It’s also time to bust out those peppermint candies because….just wait for the cuteness ahead (hey, I have to add some suspense). You can make your bow out of tulle, ribbon or even felt. See my previous tutorial on how to make a basic felt bow if you need to. Whatever you choose to use, just end up with a rectangular shape that you’ll be pinching in the middle to start shaping your bow. Take a a thin piece of tulle or yarn or thread and tie it around the middle of it to keep your bow in place for you like this:

 

Step 10: Now that your bow is tied in place, fluff it up how you like, cut a piece tulle and use it to tie your cute bow to the center of the headband in between your designs. The peppermints? wait for it……………………………..BOOM! Take a look:

IMG_20171201_024916.jpg

 

Awww, isn’t it cute? I glued a few real peppermints right in the center (left the wrappers on) but as you can see, I have fake ones pictured as well that I got from Hobby Lobby.  I think this headband turned out great and I truly hope you enjoyed it! You can do it so many different ways that turn out fantastic! You can even wrap the headband in white and tulle and then red ribbon to make it look like a candy cane. So many possibilities, have fun with it! If you see this and happen to make one, I wanna see! Send me pictures to MoFunAccessories@gmail.com and I can share them here if you’d like….or not. LOL.

Everyone please ENJOY the month of December. Be with your friends and family. Do fun stuff and have a very Merry Christmas and a Happy New Year!

giphy (2).gif

One more look….

IMG_20171201_114510_143

 

 


Click Image To Buy The Headbands I Use!

How To Make A Basic “No Sew” Felt Hair Bow

Things you’ll need:

  1. A hot glue gun or your strongest, greatest fabric glue.
  2. Some hot glue sticks (hey, leave me alone, there’s always that someone who needs to know…)
  3. An alligator clip, barrette or rubber band you’d like to attach to your bow to (I will be demonstrating with an alligator clip).
  4. Any embellishments you’d like to add to your lovely new bow once it’s finished.

Step ONE: Cut a long rectangular shape out of your felt and a much smaller one that will be going around the center of your bow (See picture).

IMG_20170927_182809

Step TWO: Take two ends of the rectangle and bring them towards the center and glue them down. I recommend over lapping them just a bit. We will call this side the back of the bow. (See picture).

IMG_20170927_182915

Step THREE: Hold up the bow with the front facing you and start pinching the center so we can start to get that bow shape we want. You can lay it down and fold it as if you’re folding a paper fan just like you did when you were a kid, whatever you have to do. Make sure it looks nice and neat…or something close to it. LOL. (See picture).

IMG_20170927_183045

Step FOUR: Tie a piece of string, yarn, anything you have where you’re pinching the bow to hold it in place for you so that you can do the next steps with ease. You’ll be covering it later anyway so don’t worry about what it looks like (See picture).

IMG_20170927_183748

Step FIVE: Place your bow face down on your work surface with your, “center of the bow” felt strip underneath. BTW, I had to cut mine a little thinner to fit and look nicely in the center of my bow. Always make adjustments where needed (See picture).

IMG_20170927_183823

Step SIX: Put a dab of glue right there in the center where that thread is and fold the bottom flap of the bow center up to meet it. Press down onto the glue (See picture).

IMG_20170927_183937

Step SEVEN: Grab that alligator clip and clip it on the top flap of your bow center. It NEEDS to be on correctly so before gluing it, fold that top flap down with the clip on it and see how it looks first. Even if you glued the clip on the incorrect way, it would still work but it would just be a bit awkward to open.

Once you have that alligator clip in the right place, go ahead and fold that flap downwards onto a dab of glue that is right in the center again (glue bottle in picture showing where the glue goes). Hold it in place for a few moments (See pictures).

 

IMG_20170927_184304IMG_20170927_184230IMG_20170927_184421

Step EIGHT: Your lovely felt bow is put together and ready to decorate! I totally forgot to flip the bow around and get the before picture but here comes the after (See picture)!!!

IMG_20170927_195738

 

Yayyyyy!!!!! Your felt hair bow is complete. The possibilities are endless with the colors of felt you can use and of course the embellishments. You can even paint designs on them if you wish. Have fun with it!

That’s it for today, folks. Until next time…